-
Fiber dağıtım kutusu
-
FTTH Dağıtım Kutusu
-
Kablo Dağıtım Kutusu
-
LSA Plus Modülü
-
MDF Ana Dağıtım Çerçevesi
-
Abone Terminal Bloğu
-
rack mount patch panel
-
Rj45 Keystone Jack
-
Yatay kablo yöneticisi
-
ağ kablosu aynası
-
110 terminal bloğu
-
ODF Optik Dağıtım Çerçevesi
-
fiber optik patch kablosu
-
Fiber optik Splice kapatma
-
IDC Terminal Bloğu
-
Ağ Punch Down Tool
-
Fiber optik Aksesuar
-
Andreas SandvikÇok deneyimli üretici!
-
Kristober GomezGüvenebileceğiniz Güvenilir, Güvenilir ve Deneyimli Bir Üretici
-
ilker ErimezTelekomünikasyon tam çözümleri verdi.
-
احمد عبداللهİran telekomünikasyon için kullanılan AMP TYCO picabond konektörleriniz mükemmel çalışıyor, müşterimiz kaliteden çok memnun.
PC Material Durable Subscriber Terminal Block With Protection Modular Design
Ücretsiz numuneler ve kuponlar için benimle iletişime geçin.
Naber:0086 18588475571
sohbet: 0086 18588475571
Skype: sales10@aixton.com
Herhangi bir endişeniz varsa, 24 saat çevrimiçi yardım sağlıyoruz.
xname | VX module | Environment condition | 5-40 degree Celsius ,Relative humidity <85% (+30 degree Celsius),Atmospheric pressure, 70-106KPa |
---|---|---|---|
plate | silver 20-40uinch | pulling-out force | not less than 25N |
standard | GB/T 5169.7-1985 | material | pc |
install | DIN rack | Protective | GDT |
Application | Telecommunication | Life circle | ≥200 times |
Vurgulamak | telecom distribution box,stb module |
Range of the section: | diameter 0,4… 1,2 mm |
Diameter on the isolation: | it is maximal 5 mm |
The current-response characteristics: | 20 A(10 A on each conductor) during not less than 10 min, without the deformation of the module |
Insulation resistance | |
“Dry” atmosphere: | > 10 12 Ohm |
“Moist” atmosphere (standard ASTM Of d618, procedure F): | > 10 12 Om |
Salt fog: (standard ASTM Of b117) | > 10 10 Ohm |
Immersion beside the water: (15 days before 3% solution Of naCI) | > 10 10 0m |
The contact resistance | |
R of material + R of the contact cross connection + by R of the contact connection of the wires | < 10 m |
Increase in the contact resistance | |
After climatic testings: | <2,5 m |
After 50 connections - turning offs: | <2,5 m |
Dielectric strength: | >3 kV of direct current during 1 minute |
Mechanical characteristics
Screw of the connection of the pair of the distributive wire: | Special alloy Of zamac, [passivirovannyy], with the paint and varnish coat |
Housing of the unit of the connection | Transparent polycarbonate |
the distributive wire: Housing: | Polycarbonate, glass-reinforced, resistance to fire “VO” |
Fitted contacts: | Tinplated phosphor bronze |
Contacts of the grounding: | Alloy Cu - Zn - Ni - Ag |
Contacts of the connection: | Tinplated solid bronze |
Sealing material before the lower part: | The epoxy resin |
Sealing material before the upper cable part: | Silicon compound |
Cover of the pair of the distributive wire: | Polycarbonate |
Housing of the insertable module: | Polycarbonate, glass-reinforced, resistance to fire “VO” |
Sealing material of the insertable module: | Gel |
The ring gasket: | Elastomer EPDM |
Spring: | the stainless steel |
Cable laying is the distributive wire: | Thermoplastic rubber |
1 pair drop wire connection module with protection is equipped with 3 pole 230V gas tube arrester with fail-safe protection.
It is a copper pair connector, specifically designed to fit onto 35mm DIN rails. It is designed to connect 2 copper pairs and has common features such as:
Insulation Displacement Connection
Reliable connections
Flame retardant performance
Modular design and installations
Water and humidity proof
Durable, High Impact, Ultra Violet resistance
Silicon gel filled drop wire STB module